Now shipping: No-Tune Predator Pulley from $899.99 — Shop Billet Parts →

TRUCK PERFORMANCE F.A.S. MOTORSPORTS

FAS500

600 Wheel Horsepower. Twin Turbos. Still Drives to Work.

The FAS500 takes the 2018+ Ford F-150 EcoBoost 3.5L and turns it into a 600 WHP daily driver — on pump gas, on the street, with the same in-house dyno verification we apply to every package we build. Twin 54mm turbos, full intercooler, custom HP Tuners calibration. Everything done at our Punta Gorda facility. Nothing farmed out.

600 Wheel HP Target
91–93 Octane — Pump Gas
Twin 54mm FAS Turbos
AWD In-House Dyno
PGD, FL Installation Facility

What's Included

Every FAS500 build follows the same validated build sheet. Same parts, same process, same dyno standard — every truck, every time.

  • FAS-Spec Twin 54mm Turbo System

    Purpose-built twin turbochargers sized for street reliability and dyno-proven 600 WHP output on the EcoBoost 3.5L platform.

  • Air-to-Air Intercooler + Stainless Plumbing

    Full front-mount intercooler with stainless charge pipes for consistent intake temps under sustained boost.

  • Upgraded Low-Side Fuel Pump

    High-flow in-tank pump upgrade to support the increased fuel demand of the turbo system on pump gas.

  • HP Tuners Calibration

    Custom HP Tuners calibration developed on our in-house AWD dynamometer. Optimized for 91/93 octane. Datalogs reviewed before vehicle release.

  • Installation Labor

    Complete installation at our Punta Gorda, FL facility by FAS technicians. No outside shops. No shortcuts.

Platform & Pricing

The FAS500 is purpose-built for the 2018+ Ford F-150 EcoBoost 3.5L. Contact us to confirm compatibility with your specific build before ordering.

Platform Price Power Target Fuel Action
Ford F-150 (2018+ EcoBoost 3.5L) $7,499.00 600 WHP 91–93 Oct Schedule →

Note: Vehicle not included. Installation service requires vehicle drop-off at our Punta Gorda, FL facility. Modifying your vehicle may affect factory warranty. Browse all packages →

The Build Process

From intake manifold to dyno sheet — every FAS500 build is handled start to finish at our Punta Gorda facility.

  1. Schedule & Drop Off

    Contact FAS to confirm your F-150 is compatible and lock in a build slot. Drop your truck at 6161 Riverside Dr, Punta Gorda, FL 33982.

  2. Baseline Dyno Pull

    Stock baseline numbers are logged on our AWD dynamometer before any parts go on. You see exactly where you started.

  3. Full Turbo System Installation

    FAS-spec twin 54mm turbos, full air-to-air intercooler with stainless plumbing, and upgraded low-side fuel pump installed by FAS technicians using our validated F-150 build sheet.

  4. HP Tuners Calibration

    Custom calibration developed specifically for your truck on our in-house dyno. Not a generic file — tuned to your vehicle's individual response, fuel system, and ambient conditions on 91/93 octane.

  5. Verification & Release

    Final dyno pulls confirm 600 WHP target. Datalogs reviewed. Your truck is not leaving until the numbers are right.

Other FAS Platforms

The FAS500 is our dedicated F-150 program. If you run a Hellcat platform or RAM TRX, we have a full performance ladder waiting.

Common Questions

What year and engine F-150 does this fit?
The FAS500 is built for 2018+ Ford F-150 trucks with the EcoBoost 3.5L engine. If you have a different year or engine variant, contact us before ordering to confirm compatibility.
Does the FAS500 require E85 or race fuel?
No. The FAS500 is tuned and verified on 91–93 octane pump gas. No E85 fuel system modifications are required at this tier.
Is this a parts kit I install myself or a full service?
This is a complete installation service. You bring your F-150 to our shop in Punta Gorda, FL — we handle the full build, calibration, and dyno verification. No DIY required.
How long does the build take?
Most FAS500 builds complete within 2–3 business days. We will confirm a timeline when you schedule your build slot.
Will this affect my factory powertrain warranty?
Modifying your vehicle may affect factory warranty coverage. FAS cannot speak to the specific terms of your Ford warranty. We recommend reviewing your warranty documentation before proceeding.

Ready to Build?

Schedule your FAS500 build today. Every truck leaves our shop dyno-verified to 600 WHP on pump gas.

F.A.S. Motorsports · 6161 Riverside Dr, Punta Gorda, FL 33982 · Mon–Fri 9AM–5PM

Top Products

Explore our most requested billet components and performance upgrades, each engineered in-house and backed by track data.

Top Services

Pair your hardware upgrades with professional installation, calibration, and security options from the F.A.S. Motorsports team.