Slide 1 of 5: 6.7L Powerstroke Piping Kit Performance Upgrades FAS Motorsports main product image | FAS Motorsports 
Slide 2 of 5: 6.7L Powerstroke Piping Kit Performance Upgrades FAS Motorsports detail image 2 | FAS Motorsports 
Slide 3 of 5: 6.7L Powerstroke Piping Kit Performance Upgrades FAS Motorsports detail image 3 | FAS Motorsports 
Slide 4 of 5: 6.7L Powerstroke Piping Kit Performance Upgrades FAS Motorsports detail image 4 | FAS Motorsports 
Slide 5 of 5: 6.7L Powerstroke Piping Kit Performance Upgrades FAS Motorsports detail image 5 | FAS Motorsports 2020–2026 6.7L Powerstroke
Eliminate Factory Boost Leaks & Unlock Faster Turbo Response
Hand-fabricated TIG-welded intercooler piping for 2020–2026 6.7L Powerstroke owners who are done with weak factory connections under heavy boost.
Performance Upgrades
$1,999.99
Important information for this package.
• No returns accepted on custom fabricated
• Requires a CCV Reroute Kit
Unlock maximum power and reliability with the FAS Motorsports 6.7L Powerstroke Piping Kit. This USA-made, TIG-welded stainless steel upgrade is engineered with a V-Band clamp to prevent boost leaks, delivering proven gains in HP, torque, and throttle response.
Why Powerstroke Owners Upgrade Their Factory Piping
The factory intercooler piping on your 6.7L was designed to meet emissions and cost targets — not to survive high-boost, heavy-tow, or performance applications. Here's what happens when it can't keep up.
Factory boots fail under high boost
Cracked silicone = unmetered air, lost power, and potential engine damage under load.
Weak OEM clamp system
Stock hose clamps can't hold seal when boost climbs — especially while towing.
Restrictive airflow geometry
Tight bends and inconsistent pipe diameter strangle turbo spool and kill throttle response.
Boost leaks spike intake temps
Leaking intercooler piping feeds hot air back in — your tune and your engine both suffer.
Stock piping becomes the bottleneck
Once you tune or add horsepower mods, factory piping is the first thing that fails. Guaranteed.
The FAS Motorsports 6.7L Piping Kit was engineered specifically to eliminate every one of these failure points.
V-band sealed. TIG-welded stainless. Mandrel-bent for maximum flow. Built in-house in Punta Gorda, FL.
Factory vs FAS — The Difference Is Not Subtle
Your truck deserves hardware that was built to the same standard as your build.
OEM hose clamps — fail under sustained boost pressure
V-Band clamp system — leak-free seal at any boost level
Stamped/crimped factory connections — weak points under heat cycles
Hand TIG-welded stainless steel — built for decades of abuse
Tight bends restrict charge air, killing spool time
Mandrel-bent geometry — optimized flow from intercooler to intake
OEM silicone boots crack under high temp + boost cycles
High-grade silicone boots rated for high-boost, high-temp applications
Black plastic / rubber assembly — looks stock, fails stock
Raw stainless & aluminum finish — show-quality under the hood
Mass-produced overseas to OEM cost targets
In-house fabricated in Punta Gorda, FL — USA-made since 2002
Every weld inspected by hand
Zero tolerance for factory-grade shortcuts
Validated performance gains
More spool. Faster response. Proven during validation.
USA-fabricated since 2002
Family shop. Real fabricators. Real accountability.
What Builders Are Saying
Unfiltered. Real trucks. Real results.
"Boost leaks completely gone. Truck pulls 14k lb trailer now and doesn't hesitate the way it used to. The V-band connections are solid — no wiggling, no leaking. Build quality is exactly what you'd expect from a shop that's been doing this for 20 years."
"Weld quality is insane. I've bought a lot of aftermarket piping and this is the best TIG work I've seen outside a custom fab shop. Fitment was dead-on, no adapters needed. Bought the CCV kit with it and the whole install took about 3 hours."
"Got this to future-proof before I tune. Throttle response is noticeably crisper even at stock power. Sounds nastier under boost too — there's a sharper spooling sound from the turbo. Shipping was fast and the packaging was legit, nothing shifted around."
"Had a boost leak for months that killed my fuel economy while towing. This kit fixed it. I'm not a "performance guy" — I just needed it to work. It works. Truck runs like it should. FAS answered every dumb question I had before I ordered too."
5.0
Average rating
100%
Would recommend
FAS Motorsports has been building diesel performance parts in-house since 2002. Thousands of installs across the country.
Complete Your Airflow Setup
Don't leave performance on the table. These add-ons are engineered to work together with your piping kit.
Piping Kit
Lock in boost-sealed intercooler piping. Eliminate the #1 factory failure point.
- ✓V-Band clamp system
- ✓TIG-welded stainless piping
- ✓Mandrel-bent geometry
- ✓Silicone boots + hardware
$1,599.99
You Are HerePiping Kit + CCV Reroute
The CCV reroute is required by FAS and eliminates crankcase pressure routing through your new piping.
- ✓Everything in Stage 1
- ✓CCV Reroute Kit (+$325)
- ✓Prevents oil contamination in intake
- ✓Keeps your new piping clean long-term
$1,924.99
Add CCV ReroutePiping Kit + CCV + Coolant Line
Complete the system. The coolant line kit eliminates a common leak point and keeps your Powerstroke thermally stable.
- ✓Everything in Stage 2
- ✓Coolant Line Kit (+$150)
- ✓Full intercooler system refresh
- ✓Maximum long-term reliability
$2,074.99
Build Full SetupAdd-ons are selected on the product page above. CCV Reroute Kit is required for all piping kit installations.